2LT IOM, IO interior, black stripes, auto 2010 Camaro V6 3.6

Showcase your build or project here for all to see and follow along
User avatar
Full Blown Post Whoring Vet
Posts: 7556
Joined: Wed Jan 12, 2011 12:18 pm
Location: Clarkston, Michigan
PostPosted: Sat Jan 15, 2011 7:02 pm
Thanks for checking in and seeing my changes.

Little background.

I placed my order for my Camaro on Feb. 17, 2010...... 2LT with IOM paint, IO interior, black stripes, automatic.

This will be my daily driver except for winter months. MSRP was $30205.00 and my GM supplier cost was $29360.00. GM employee price was cheaper in 2009 before the new employee reduced pricing took affect this Jan.2010

I have found that my Camaro will be the only one in Michigan (for the entire 2010 build) with this option package (no RS or sunroof packages for me.) So I have a 1 of build for Michigan.

I knew I wanted a 5th gen. Camaro when I first started helping to manufacture the Body Side Outer (rear qtr. panel) a few years ago. I work for GM on the manufacturing side of the business. Much of what my team and I did, helped to get this great looking panel to the market.

I took delivery on April 7th, 2010

I have a long list of items I plan to purchase over the next few months (and years) to make my great car even better.


Performance

Injen CAI
Injen CAI Hydro Shield
OBX Headers
Magnaflow Resonated X Pipe
MRT V2 Axle Back
Vmax Ported Throttle Body
RX Oil Catch Can & Oil Separator
Trifecta Trans. Tune
Trifecta Engine Tune
Royal Purple Rear Diff. Fluid
Vmax Black-Ice-olator Manifold Insulator
Ported Intake Manifold (RX)
RX Plenum Spacer
R1 Rotors
Hawks Ceramic pads (yellow)
Motul RBF 600 DOT 4 Brake Fluid
Goodridge Stainless Steel Brake Line

Suspension

Eibach Lowering Springs
Eibach Sway Bars
Pedders EP1200 Cradle Sub frame Inserts
Pedders EP2112 Steering Rack Bushing
Pedders EP6578 Front Radius Rod Bush Inserts
BMR Trailing Arms
BMR Toe Rods
BMR Trailing arm bushing BK006

Lighting

Blue LED Footwell
Blue LED Dome Light
Blue LED Backseat strips
Blue LED Trunk Light strips
Blue LED Trunk Light
Blue LED Under Hood Spot Lights (AAC)
LED License Plate Lights
Oracle H13 HOD Bulbs
5202 LED Fog Lights
Blue LED above Sill Plate Lights
Blue LED lighting behind front grill
Blue LED cup holder lights
Sequential Turn signal Harness Kit

Interior

Custom Floor Mats
Aluminum Billet Sill Plates
Aluminum Billet Race Pedals
Removed Center Speaker
Removed Warning Labels on Visors
35 % Window Tint
UltraGauage Mounted on Dash
IPOD Inferno Orange
Camaro Seat Belt Covers
Road Eye Black Box Camera
Beltronics GX2 Accelerometer
Camaro emblem on the dash
Hot Rod 2011 Power Tour Back Glass Decal
TEAM LLT Headrests
Cargo Trunk Mat
Carbon Fiber vinyl ignition spot
Subthump AMP Board and wires
Crunch 1800 Watt Amp
Heel Guard Protector
Aluminum Billet Cup Holder

Exterior

Stillen Front Spoiler
Black Vinyl on Front Bow Tie
Black Vinyl on Rear Bow Tie
Black Painted Rear Tail Lamp Bezels
Side Marker Tint
Reverse Lamp Tint
Front Turn Signal Lamp Tint
Black Vinyl Gill Stripes
G2 Painted Calipers
Ghost "350HP" Hood Decals
Custom Painted Rear Trunk Close out Panels
Hot Rod 2011 Power Tour Windshield Decal
License Plate "TEAMLLT"
Detroit Gen 5 Club Decals
TEAM LLT Emblems
IOM Painted XM Antenna
Black Billet Upper Grill
Black Billet Lower Grill
LED Side Marker Lamps
TSW Nurburgring 20 X 9 Wheels
General G-Max 275/40/20
2 18'x9.5" Corvette C-6 Z-06 wheels for the rear
2 Mickey Thompson Street ET II drag radials 265/40/18 (3.57 gear)
IOM fuel door
ZL1 Rocker
RPI Splash Guards front and rear
Anvil Spoiler
RK Sport Valence
Image
for my build check here...http://bowtiev6.com/forum/viewtopic.php?f=28&t=57 ..........................................................TEAM LLT
User avatar
Full Blown Post Whoring Vet
Posts: 7556
Joined: Wed Jan 12, 2011 12:18 pm
Location: Clarkston, Michigan
PostPosted: Sat Jan 15, 2011 7:03 pm
Here are links to my mods, installs, and other items.

Aluminum Billet Grill (upper and lower) viewtopic.php?f=17&t=2183

Aluminum Billet Racing Pedals viewtopic.php?f=17&t=68

Aluminum Billet Sill Plates viewtopic.php?f=17&t=58

Amp (Crunch and equipement) viewtopic.php?f=20&t=2182

Bow Ties with Vinyl viewtopic.php?f=17&t=63

Calipers Painted with G2 viewtopic.php?f=17&t=67

Camaro Decal on the dash viewtopic.php?f=17&t=1287

Deck Lid Close Out Panels Painted viewtopic.php?f=17&t=54

Eibach Lowering Springs viewtopic.php?f=14&t=28

Eibach Sway Bars viewtopic.php?f=14&t=52

Engine Cover Painted viewtopic.php?f=17&t=65

Footwell Lighting viewtopic.php?f=17&t=64

Front Speaker Delete viewtopic.php?f=20&t=84&p=613&hilit=speaker#p613

Front Turn Marker Tinting viewtopic.php?f=17&t=71

Gill Stripes viewtopic.php?f=17&t=60

INJEN Cold Air Intake viewtopic.php?f=7&t=51

INJEN Painting Project viewtopic.php?f=17&t=376

License Plate Holder viewtopic.php?f=17&t=1343

Llyod Floor Mats viewtopic.php?f=17&t=59

MRT 2.0 Axle Back Exhaust viewtopic.php?f=7&t=55

OBX Headers and Magnaflow X Pipe viewtopic.php?f=7&t=1624

Ported Intake Manifold viewtopic.php?f=7&t=2651

Rear Seat blue LED lighting viewtopic.php?f=17&t=936

Rear Spoiler Install viewtopic.php?f=17&t=36

Reverse Light Tinting viewtopic.php?f=17&t=70

Road Eye Black Box Camera viewtopic.php?f=20&t=1078

Roto-Fab Radiator Cover viewtopic.php?f=17&t=340

RX Oil Catch Can and Breather viewtopic.php?f=7&t=125

Seat Belt Covers viewtopic.php?f=17&t=1077

Shock Tower Covers viewtopic.php?f=17&t=1308

Side Marker Tinting viewtopic.php?f=17&t=69

Stillen Front Splitter viewtopic.php?f=17&t=126

Tail Lamp Bezels Painting Project viewtopic.php?f=17&t=1009

TEAM LLT Emblems viewtopic.php?f=27&t=1307&hilit=team+llt&start=150

TEAM LLT Headrest viewtopic.php?f=17&t=1507

TEAMLLT License Plate viewtopic.php?f=17&t=1251

Throttle Body viewtopic.php?f=7&t=1529&p=28421

Trunk Lighting viewtopic.php?f=17&t=630

Ultra Gauge viewtopic.php?f=10&t=1010

Under Hood Cosmetic Changes viewtopic.php?f=17&t=401

Under Hood Lighting viewtopic.php?f=17&t=878

Wheel Center Cap Vinyl Bow Ties viewtopic.php?f=17&t=53

Window Tint 35% viewtopic.php?f=17&t=66

1/4 Mile Drag Strip viewtopic.php?f=23&t=30

330 HP emblem (decal) viewtopic.php?f=17&t=984
Last edited by rtcat600man on Sun Jan 23, 2011 7:37 am, edited 8 times in total.
Image
for my build check here...http://bowtiev6.com/forum/viewtopic.php?f=28&t=57 ..........................................................TEAM LLT
User avatar
Mini-Post Whore
Posts: 2458
Joined: Wed Jan 12, 2011 1:00 pm
Location: So Cal
PostPosted: Mon Jan 17, 2011 3:08 pm
I love your build. Definitely a sweet looking ride.... and that 13 second 1/4 doesn't hurt either. :mrgreen:
User avatar
Full Blown Post Whoring Vet
Posts: 7556
Joined: Wed Jan 12, 2011 12:18 pm
Location: Clarkston, Michigan
PostPosted: Mon Jan 17, 2011 4:48 pm
Thank - you. I am enjoying the time doing the mods and it is consuming my life. LOL
Image
for my build check here...http://bowtiev6.com/forum/viewtopic.php?f=28&t=57 ..........................................................TEAM LLT
User avatar
Mini-Post Whore
Posts: 2458
Joined: Wed Jan 12, 2011 1:00 pm
Location: So Cal
PostPosted: Mon Jan 17, 2011 4:56 pm
rtcat600man wrote:Thank - you. I am enjoying the time doing the mods and it is consuming my life. LOL


I hear you there lol.
User avatar
BowtieV6 Fanatic
Posts: 1696
Joined: Wed Jan 12, 2011 1:59 pm
Location: San Diego, CA
PostPosted: Wed Jan 26, 2011 12:17 am
I'd vote for ya. :)
Image
Sold :(
User avatar
Running 11s
Posts: 1354
Joined: Wed Jan 12, 2011 2:34 pm
Location: Michigan
PostPosted: Wed Jan 26, 2011 3:28 pm
:woot: :thumbsup:
MRT V1/ Injen CAI/ VMax TB/ RX Catch Can/ TrifectaImage
User avatar
Gearhead
Posts: 206
Joined: Wed Jan 26, 2011 9:27 pm
Location: Mckinney, Tx
PostPosted: Sat Jan 29, 2011 8:03 pm
rtcat600man wrote:Thanks for checking in and seeing my changes.

Little background.

I placed my order for my Camaro on Feb. 17. 2LT with IOM paint, IO interior, black stripes, automatic.

This will be my daily driver except for winter months. MSRP was $30205.00 and my GM supplier cost was $29360.00. GM employee price was cheaper in 2009 before the new employee reduced pricing took affect this Jan.2010

I have found that my Camaro will be the only one in Michigan (for the entire 2010 build) with this option package (no RS or sunroof packages for me.) So I have a 1 of build for Michigan.

I knew I wanted a 5th gen. Camaro when I first started helping to manufacture the Body Side Outer (rear qtr. panel) a few years ago. I work for GM on the manufacturing side of the business. Much of what my team and I did, helped to get this great looking panel to the market.



This is great to have someone who actually helped to make this car a reality, on this site. "THANKS A MILLION".
That being said, why did they (or your team) choose not to have the fuel door on top of the rear qtr panel like the prototype??
:shrug:
2010 1LT/RS Summit White w/IOM - GMPP Exh - Injen CAI SR - Heritage Grill
Image
User avatar
Full Blown Post Whoring Vet
Posts: 7556
Joined: Wed Jan 12, 2011 12:18 pm
Location: Clarkston, Michigan
PostPosted: Sun Jan 30, 2011 12:01 am
Leavitt71 wrote:
rtcat600man wrote:Thanks for checking in and seeing my changes.

Little background.

I placed my order for my Camaro on Feb. 17. 2LT with IOM paint, IO interior, black stripes, automatic.

This will be my daily driver except for winter months. MSRP was $30205.00 and my GM supplier cost was $29360.00. GM employee price was cheaper in 2009 before the new employee reduced pricing took affect this Jan.2010

I have found that my Camaro will be the only one in Michigan (for the entire 2010 build) with this option package (no RS or sunroof packages for me.) So I have a 1 of build for Michigan.

I knew I wanted a 5th gen. Camaro when I first started helping to manufacture the Body Side Outer (rear qtr. panel) a few years ago. I work for GM on the manufacturing side of the business. Much of what my team and I did, helped to get this great looking panel to the market.

This is great to have someone who actually helped to make this car a reality, on this site. "THANKS A MILLION".That being said, why did they (or your team) choose not to have the fuel door on top of the rear qtr panel like the prototype?? :shrug:


Your WELCOME.

Thanks for buying a CAMARO.

That is a GREAT question, one to which I have asked the same thing. So far I have not gotten an answer. Then again I quit asking too.
Image
for my build check here...http://bowtiev6.com/forum/viewtopic.php?f=28&t=57 ..........................................................TEAM LLT
User avatar
Running 11s
Posts: 1386
Joined: Thu Jan 20, 2011 2:59 pm
Location: Spokane, WA
PostPosted: Wed Feb 16, 2011 1:12 am
Nice laundry list of projects! You are obviously obsessed. It has resulted in an amazing Camaro! Hats off to ya!
Tori
2010 IBM 2LT RS 6M
"Raised by Wolves"
Image
Next

Return to Project Forum

Who is online

Users browsing this forum: Bing [Bot] and 1 guest